Bras pour double moniteur

Original review, see update below: I run two 27" gaming monitors, and these arms can't even handle a 12 lb monitor each, their tilt gives out and I'm left with a monitor facing down at my desk. Pretty disappointing. I've tried both arms as well and it's the same result. I purchased this dual arm over the other because it stated it could handle up to 32" monitors, so you'd imagine the weight of a 27" monitor wouldn't be an issue. You'd be wrong, like I was. Another note, the clips at the base of the mount that hold the cables in place is attached really flimsily, and pop off easily. Sure would have liked this system to work for me as the actual arm build quality is great, but I'm out of luck. Pictured is my monitor facing downward despite starting with a slight upward tilt, and tightened with the allen key so tight that my hands hurt.

UPDATE: So with some investigation I have determined that the reason the monitor arm tilt can't handle my G7's weight (which is apparently 12.1lbs) despite it's 19lb rating is likely because of the monitor's extreme curve and therefore significantly changed center of gravity in relation to the position of the VESA mount on the back. These monitor mount arms can hold my 14lb, 32" flat panel LG monitor no problem at any tilt angle, so the change in center of gravity for my G7 is likely enough to turn my 12.1 lbs into something the arm can't manage. So really, just be conscious of this if you intend to mount curved screens!

I've changed my review to 4 stars because after buying other mount arms I can attest to the quality of these: they're great. Full metal build, and the dual gas arm design is great. The only gripe I still have is the lack of tension in the lower cable clips that attach to the base of the arms, they just don't take any pressure before getting popped off. Cheers

Great desk, lifts 2 monitors, easy to set up and built in cable management is great. Would recommend.

This worked great to hold my Samsung 32" curved monitor and Dell 24" in portrait mode.

I have to tighten the tilt as hard as I can... Wouldn't go much heavier with a curved monitor then 12lkbs

Great build quality and a price that can't be beat.

I was surprised how solid these arms were. Seem very heavy duty.

Holds a Apple Studio Display and MacBookPro no problem after fine tuning the weight adjustment with the provided Allen key. Cable management channels are a nice touch.

Would buy again, but I doubt that I’ll need to!

I ordered my first standing desk with Effy Desk along with the dual Monitor arms. I loved the easy installation guide and the quality it came with. Unfortunately, my desk was damaged due to the negligence of the courier, UPS. Hannah was very responsive and helped me with a second table top. And once again, the table top came damaged from UPS throwing the desk on my doorstep.

My overall experience with Effydesk and Hannah was fantastic. However, I now have to source my actual table top locally.

Functional and beautiful.

Bought these arms to improve the ergonomics of my home office. It was a very quick and painless setup and they give me a whole lot of control on the positioning and angles of the screens. The arms are sturdy and my screens don't shake. There are several ways to increase or decrease the tension in the arms. and they can be setup using a C clamp so no hole in the desk needed.

Got a duel monitor mount and it works great!! Easy to install and supports my heavier curved monitor.

What can I say? This a jewel! Installation was easy with clear instructions, works as intended and looks amazing! I used it with two 27'' wide curved monitors and I just love it!

Really nice arms for monitors. Comes with a desk mount, either drill hole or clamp style, comes with all hardware for either,. Each arm is strong steel heavy built that attaches to the desk mount. Once both monitors are screwed in place, each arm can move independently from the other so you can position the monitors together for gaming or apart for 2nd screen sessions. Each pre-angled bent arm swivels 360 degrees at 2 lower specific joints, 180 degrees horizontal upper joint, 120 degrees vertical top joint, 360 degrees monitor connection axis point, but you can get a large range and tilt by adjusting at these points, resulting in a good area coverage by both arms.

Perfect for my dual 30 inch monitors. Love the color matches with my oakwood top. Has two options of onboarding onto my desktop through clamp or grommet which was also nice.

does what i need it to do and no complaints.

Very strong and tall! I am super happy with it.

We got these monitor arms for my 248hz gaming monitors. Fast delivery, 2 business days and came double packaged to ensure the insides does not get damaged. Properly insulated and the monitor arms were pristine. Love the fact they have cable management on the back side of these things so my set-up is super clean because of this. You pay for what you get for and this was definitely worth the higher price compared to amazon

Due to the pandemic most of us have to work from home, I had a cheaper smaller sit/stand desk without the monitor mounts before I ordered this one, the difference is amazing. I no longer have the tight muscles, and the headaches are pretty much all gone. The whole set up was easy to put together and i have no issues. They move when you want them to and stay put like they are supposed too. I have 2-30 inch monitors mounted and they are virtually seamless. I couldn't be more happier with choosing Effy desk for my workspace.

This dual monitor mount system is very easy to setup and extremely durable. The pieces are heavy and it feels like it could hold much more weight than advertised.

I didn't want to drill a hole in my desk so I installed using the clamp. It holds very snug to the desk and heavy steel support pole doesn't move or flex if you try pull on it.

The arms are very hard to move like other reviewers have mentioned but the kit comes with adjustment wrenches so you can loosen the tension while adjusting if you don't have the arm or hand strength to move the joints the way they are shipped.

The monitors line up perfectly after using the wrenches to fine tune the height once the monitors were hung.

As long as you don't intend on constantly moving the monitors around, there's no reason to spend money for other mounts.

Definitely matches the color scheme of my office. Was finally able to find a sturdy, beautiful white monitor arm that was able to fit my 28" dual screen monitors. Arrived quickly and parts were all good quality.

the mounts are super sturdy, its a mount it does the job for my 2 20" monitors

Just the quality i needed in order to support my heavy 31" monitors. Very light weight and easily maneuverable. Package came fast and have no complaints.

The dual monitor mount is very reliable. All I can say is that I am completely satisfied with the service and quality of it.

I just love the idea that this monitor mount can carry two screens at the same time. So awesome!!

This dual monitor mount definitely holds the entire monitor tight with a free switch on it which you can easily turn the monitor to landscape or portrait.

The mount is like the others. Features and highlight of the product are still the same.

This mount supports two monitors with very high quality and solid built materials.

This is what I need for my two monitors. Solis and stable.

The dual-screen desktop is amazing. It easily adjusts to the screen. Completely great in quality.

I absolutely like the durability of this product. It actually holds two monitors. I can see that my work becomes easier because of this.

The quality is great and design is great too. It can carry my two monitors at the same time without any issues.

It just helps me to obtain an aligned and organized placement of monitors. Great job.